Shooting Target Stencil – Reusable 10 Mil Mylar Spray Paint & Airbrush Target Template for Paper, Cardboard & Steel Plates

Paint your own shooting targets in seconds. This reusable mylar stencil lays out a classic bullseye with numbered scoring rings (5 through 9) and a solid center, plus four smaller sight-in targets in the corners. Lay it on your target, hit it with spray paint or an airbrush, lift, and you have a crisp, clean target ready for the range.

Great for: paper and cardboard targets, plywood target boards, and refreshing steel plates (AR500 and other steel targets) so you can clearly see new hits. Popular for sighting in rifles and pistols, practice drills, and making a stack of matching targets at home for a fraction of the cost of pre-printed ones.

• Three sheet sizes: 12″ x 18″ (large target), 8″ x 12″ (standard) and 6″ x 8″ (compact). Choose your size above.
• Thick 10 mil mylar: rigid enough to lay flat and line up quickly, flexible enough to wrap a curved or uneven surface, and reusable hundreds of times.
• Bridged rings: small bridges keep every ring and number connected, so the stencil holds its shape and never loses pieces.
• Five targets in one: the main numbered bullseye plus four corner targets for multiple aiming points on a single sheet.
• Easy to clean: wipe off excess paint between uses; let paint dry and it peels or wipes away.

How to use

1. Customer tip: before laying the stencil down, lightly mist the painting side of the stencil with WD-40 and wipe off the excess with a clean cloth. Paint is less likely to stick and build up, so the stencil cleans up much more easily. Keep the WD-40 off the target itself, or the target paint may not stick.
2. Lay the stencil flat on a clean, dry target surface. Tape the corners or use a light spray adhesive to stop overspray creeping under the edges.
3. Spray in light, even coats from about 8 to 12 inches away. A contrasting color works best (for example black on white, or white or orange on a steel plate).
4. Lift the stencil straight up while the paint is still wet, and you’re ready to shoot.

Laser cut, made and shipped in the USA by Whitmore Farm. Also available on Amazon. Questions or a custom size? Contact us.